$129.05 – $260.15
Series 2196
For cleanest cut in veneered panels, for cross and mitre cuts in solid wood, MDF, chipboard, plywood, glue laminate, veneers and bead board. Cut panels with larger thickness (20-80mm) at a low feed rate. For cross and mitre cuts in fibrous materials such as solid wood, plywood, OSB, multiplex etc.
Pinhole Legend:
CNL = Combination Pinholes 2/7/42, 2/9/46.4 and 2/10/60
KNL = Combination Pinholes 2/10/60 and 2/7/42
For cleanest cut in veneered panels, for cross and mitre cuts in solid wood, MDF, chipboard, plywood, glue laminate, veneers and bead board when a scoring blade is not in use. Cut panels with larger thickness (20-80mm) at a low feed rate. For cross and mitre cuts in fibrous materials such as solid wood, plywood, OSB, multiplex etc. The high angle ATB tooth geometry insures that the exit cut on the bottom of the material is tear-out free.
Quick Links
Support
Contact Info
